Compared with the original stubble machine, the automatic stubble cooler is developed on the basis of the original stubble machine. The working time is different. The original stubble cooler takes 40-50 minutes to cool the stubble, and the upgraded automatic stubble cooler only takes about 20 minutes, which greatly shortens the time, improves the efficiency, and shortens the working time. Whether used by enterprises or individuals, the operating time of the whole equipment can be effectively improved, so the workload produced by the fixed time content can be effectively improved.
In addition, the automatic stubble cooling machine shortens the time, and the whole machine is equipped with small power, short working time, energy saving, and the efficiency of stubble cooling will be better. The original stubble machine, in the process of stubble cooling, the stubble falling into the underground air duct from the bottom hole accounted for about 3% of the total, which could not be recovered, resulting in a direct waste of raw materials.
Before installation, complicated preparations such as digging pits, building walls and arranging sewage pipes are required. If an automatic stubble cooler is used, the stubble leaked from the mesh belt will fall directly into the stainless steel box designed by this machine. After cleaning, it will be completely used in the pool, which is simple and convenient to clean, eliminating waste and environmental pollution. Before installation, the workshop floor does not need any preparation. It can also be used in mobile mode as required.
What are the advantages of the automatic stubble cooler compared with the original stubble cutter? The above is the relevant use of the question. If you have any doubts or needs, please come to our website http://www.qfrtrq.com Ask and understand!