1、 The selection and treatment of wood should be based on the specific requirements of the guests. Too professional knowledge and operation should be specific. Skip here

二、将要生产的材料，用数控带锯开料，平板的材料，开出弯弧度的料。率，高品质的生产，很重要哦。高大上的木酒桶开料这步很重要，不一样的尺寸，直接影响组装后整个桶的质量及外观了。

2、 The materials to be produced are sawed with numerical control band, the materials of flat plate, and the materials of camber are cut. High efficiency, high quality production, is very important. It is very important to open the material of the tall wooden wine barrel. Different sizes directly affect the quality and appearance of the whole barrel after assembly.

三、开好后的料，还要再加，在两头相应的位置挖出榫位置来。如图中凹下去的位置。

3、 After the opening of the material, but also add, in the two corresponding positions dug out the tenon position. As shown in the figure, the concave position.

四、挖好榫后，组装工作开始了。一块块弧形料排好队，用支持小木条固牢，一个个半圆就加工成了。

4、 After the tenon was dug, the assembly work began. A block of arc-shaped material is arranged in a good line and fixed with supporting small wooden strips, which are processed into semicircles one by one.

五、半圆后的木桶，进入打磨工序。打磨内圆—合低—打磨外圆。箍桶，桶箍现在市场一般选用的是镀锌的钢皮与不锈钢皮，材料的厚度在3mm。

5、 The semicircle barrel enters the grinding process. Grinding inner circle - closing low - grinding outer circle. Finally, the hoop is generally galvanized steel skin and stainless steel skin, with the thickness of 3mm.

六、木桶的成败进入的工作了，防腐，防水处理，精打磨，油漆，一系列的工作完成后，漂亮的、高大上的木酒桶就可以打包出货了。

6、 The success or failure of the cask has entered the final work. After a series of work, such as anti-corrosion, waterproof treatment, fine grinding and painting, the beautiful and tall cask can be packed and shipped.

本文由自动售酒机进行编写，想要了解更多的产品及更详细的精彩内容，请关注我们的网站：http://www.qfrtrq.com/您的惠顾是对我们很大的支持。

This article is written by the vending machine. If you want to know more about our products and more details, please pay attention to our website: http://www.qfrtrq.com/ your patronage is a great support for us.