全自动晾茬机采用两机转子，粉碎物料更加细致，沒有筛网规格不容易堵塞。即便是老式凉茬机粉碎不上的高低温物料，也可以轻轻松松粉碎，不堵塞。主要特点是低成本，生产量高，粉碎好用，酿酒厂凉茬机，可调式內部锤头总数和部位来源于在操纵进料粒度。

The fully automatic stubble drying machine adopts two rotors, which finely crushes materials and does not have a mesh size that is easy to block. Even high and low temperature materials that cannot be crushed by old-fashioned cold stubble machines can be easily crushed without clogging. The main characteristics are low cost, high production capacity, easy crushing, cold stubble machine in distillery, adjustable internal hammer head, total number and position sourced from controlling the feed particle size.

全自动晾茬机是将摊晾、加浆、加曲、搅拌、卸料等工序一次性完成，摊晾效果好，在摊晾过程中设置多个搅拌装置，使凉茬在摊晾过程中松散、不易结坨，加浆、下曲均匀，数量可调节。那要如何稳定的使用自动凉茬机呢？

The fully automatic stubble drying machine completes the processes of spreading, adding slurry, adding yeast, stirring, and unloading in one go. The spreading effect is good, and multiple mixing devices are set up during the spreading process to make the cool stubble loose and less prone to clumping. The addition of slurry and adding yeast is uniform, and the quantity can be adjusted. How to use an automatic stubble cooler stably?

一、安装前应先查看自动凉茬机各部位，零件是否有松动现象，如发现，需修理后方可安装。

1、 Before installation, check all parts of the automatic stubble cooler to see if there is any looseness in the parts. If found, repair is required before installation.

二、安装时，打茬机跑车轮与道轨间隙以打茬机与轨迹来回跑动时为规范。

2、 During installation, the gap between the running wheels of the stubble trimmer and the track is standardized when the stubble trimmer runs back and forth with the track.

三、打茬机安装结束后，需要行试工作五分钟左右，查看各部位是否有杂音现象出现，如发现杂音应泊车检修，待试工作正常后，方可投入正常生产运用。

3、 After the installation of the stubble cutting machine is completed, it is necessary to conduct a trial operation for about five minutes to check for any noise in various parts. If any noise is found, it should be parked for maintenance. Only after the trial operation is normal can it be put into normal production and use.

四、运用过程中，应经常留意有无异常动静，轰动是否加大，如发现杂音应及时泊车检修。

4、 During use, regular attention should be paid to any abnormal movements and whether the noise increases. If any noise is found, the car should be parked for maintenance in a timely manner.

五、打茬机投入运用后，应定期查看螺栓有无松动，零部件有无损坏，如发现应根据具体情况检修或更换零部件。

5、 After the stubble cutting machine is put into use, it should be regularly checked for loose bolts and damaged parts. If found, it should be repaired or replaced according to the specific situation.

六、在运用过程中，注油部位应定期注油，一般每三个月注黄油一次，以确保打茬机各传动部位润滑正常，减少磨损。

6、 During use, the oil injection area should be regularly lubricated, usually with butter every three months, to ensure normal lubrication of all transmission parts of the stubble machine and reduce wear.

七、自动凉茬机若长时间停用从头投入生产运用时，要从头进行查看，并通过试车工作正常后再投入生产运用。

7、 If the automatic stubble cooling machine is stopped for a long time and put into production again, it should be checked from the beginning and put into production again after the test run is normal.

本文由全自动凉茬机提供技术支持，更多的详细精彩内容请点击我们的网站http://www.qfrtrq.com，我们将会全心全意为您提供满意的服务。

This article is supported by a fully automatic stubble cooler. For more detailed and exciting content, please click on our website http://www.qfrtrq.com We will wholeheartedly provide you with satisfactory service.