With people's attention to wine containers, wooden wine barrels have attracted more and more attention. They have been praised by people for their beautiful appearance. But what problems should you pay attention to when printing them? Now let Rentai wine container technicians give you a detailed answer.
Problems that should be paid attention to when printing wooden wine barrels
First of all, wooden wine barrel printing and attention. Wine quality packaging printing ink adhesion is poor, using finger scraping ink can put down the washing and external alcohol packaging printing quality, ink film will fall, especially after soaking in water for a period of time, drying again, ink can also be put down.
Secondly, equipment printing methods and measures: add appropriate amount of cheap natural rosin, should adhere to the test after wine packaging production, when the adhesion is not good, add petroleum resin, when the adhesion is not good, add domestic petroleum resin, choose the surface is not smooth wooden barrel packaging matrix, instead of wine packaging and printing ink, its packaging and printing ink add antiskid agent. Its forestry can continue to develop and request help forestry industrialization forestry industrialization is an important way to complete forestry can continue to develop, forestry can continue to develop is now the basic premise. It is necessary for forestry industrialization to take the useful performance and continuous strengthening of forestry comprehensive benefits as the guideline. The wooden wine barrel ensures the sustainable and stable development of economy and society with ecological and social benefits to ensure the completion of ecological benefits.
The technological process of solid wood barrel:
1. Fabrication equipment
Draw a circle with a diameter of 18 mm at both ends of the drum-shaped gypsum body. Carefully dig in 3 mm with a knife, and keep the edge intact. Slightly accidentally, some damage can be dipped in water with a brush, then some plaster powder applied to the damage, and then sanding.
2. Hoop Equipment
Cut out the cardboard strip 1 mm wide and roll it in the middle of the gypsum body 3 mm away from both ends as a wooden wine barrel hoop.
3. Punch Cover of Manufacturing Equipment
Draw a circle of 18 mm in diameter on a piece of wood or plastic. After cutting or cutting, paste colored paper on the back of the poking cover and trim the ends of the plaster. Another two pieces of plastic were cut out with arc notches and placed at 10mm away from both ends as wooden barrel brackets.
4. Platform for it
Draw a 30 mm long and 20 mm wide rectangle on a piece of wood or plastic, and dig a 10 mm x 10 mm square notch in the middle, like a concave character, as the front platform of the bar.
5. Assembly platform bracket and railings
Firstly, the wooden or plastic strips with thickness of 1mm are used for reserve, and 10mm long thin strips are glued under the platform to form platform bracket, then 5mm high thin strips are glued on the platform as platform railings.
6. Making stairs
The pieces of wood or plastic are cut into 10 pieces of 10 mm x 10 mm square, and the glue is synthesized into stairs. When the glue is dry, they are cut into two stairs, and the railings are installed to glue to the notches behind the wine phase and in front of the platform, respectively.
Benefits of wooden barrels:
The liquor can be stored. The liquor can absorb the fragrance, color and mellow taste from the barrel. Oxygen will gradually infiltrate into the barrel, so it can soften the liquor texture. The organic substances in the liquor will slowly reflect, making the liquor more mature. Now it has more and more styles. Designers will choose different trees to make barrels according to the different wine. The effect is different, and it is easy to put and not fragile.