The maintenance of the automatic stubble cooler is particularly important as it not only ensures that the wine brewed is sweeter and more lingering, but also reduces your maintenance costs.
It is recommended to take the initiative to maintain and regularly check the normal operation of the equipment to ensure that there are no or fewer malfunctions in the wine making equipment. The technical department should follow the maintenance principles, and the maintenance time management personnel can freely grasp them.
For maintenance equipment, there is no need to replace parts, which is economically cost-effective and does not affect the work of other production equipment in the factory. Maintenance is different, requiring replacement of parts and wasting equipment working time, thereby affecting the production tasks and plans of the entire enterprise, and affecting the economic benefits of the enterprise. So you need to pay attention to daily equipment maintenance to reduce the frequency of repairs.
Compared with the original stubble cutting machine, the fully automatic stubble cutting machine was developed on the basis of the original stubble cutting machine. The difference in working time is that the original stubble cutting machine takes 40-50 minutes to cool the stubble, while the upgraded fully automatic stubble cutting machine only takes about 20 minutes, greatly shortening the time, improving efficiency, and shortening working hours. Whether it is used by enterprises or individuals, it can effectively improve the operating time of the entire equipment, Thus, the workload generated by fixed time content can be effectively improved.
In addition, the fully automatic stubble cooling machine has shortened the time, and the whole machine is equipped with less power, shorter working time, energy-saving, and better efficiency compared to the cooling stubble. During the cooling process of the original stubble cutting machine, about 3% of the total amount of stubble fell into the underground air duct from the bottom hole, which could not be recovered, resulting in direct waste of raw materials. Before installation, tedious preparations such as digging pits, laying walls, and arranging sewage pipes are required.
If a fully automatic stubble cooling machine is used, the leaked stubble from the cooling mesh belt will directly fall into the stainless steel box designed for this machine. After cleaning, it will be fully utilized in the pool, making cleaning simple and eliminating waste and environmental pollution. Before installation, the workshop floor does not require any preparation work. It can also be moved and used as needed. For more related matters, come to our website http://www.qfrtrq.com consulting service