自动凉茬机是将摊晾、加浆、加曲、搅拌、卸料等工序一次性完成，摊晾效果好，在摊晾过程中设置多个搅拌装置，使凉茬在摊晾过程中松散、不易结坨，加浆、下曲均匀，数量可调节。那要如何稳定的使用自动凉茬机呢？

The automatic stubble cooler is used to complete the processes of spreading, adding slurry, adding starter, mixing, and unloading at one time. The spreading effect is good. Multiple mixing devices are set during the spreading process to make the cool stubble loose and not easy to lump during the spreading process, adding slurry and adding starter are uniform, and the quantity can be adjusted. How to use the automatic stubble cooler stably?

一、安装前应先查看自动凉茬机各部位，零件是否有松动现象，如发现，需修理后方可安装。

1、 Before installation, check all parts of the automatic stubble cooler for looseness. If found, it can be installed only after repair.

二、安装时，打茬机跑车轮与道轨间隙以打茬机与轨迹来回跑动时为规范。

2、 During installation, the clearance between the running wheel of the stubble machine and the track shall be the standard when the stubble machine runs back and forth with the track.

三、打茬机安装结束后，需要行试工作五分钟左右，查看各部位是否有杂音现象出现，如发现杂音应泊车检修，待试工作正常后，方可投入正常生产运用。

3、 After the installation of the stubble machine, it is necessary to carry out a trial operation for about five minutes to check whether there is any noise in each part. If any noise is found, it should be parked for maintenance. After the trial operation is normal, it can be put into normal production and operation.

四、运用过程中，应经常留意有无异常动静，轰动是否加大，如发现杂音应及时泊车检修。

4、 During operation, pay attention to whether there is any abnormal movement and noise, and whether the noise is increased. If any noise is found, park the car for maintenance in time.

五、打茬机投入运用后，应定期查看螺栓有无松动，零部件有无损坏，如发现应根据具体情况检修或更换零部件。

5、 After the stubble machine is put into use, check regularly whether the bolts are loose and whether the parts are damaged. If found, repair or replace the parts according to the specific situation.

六、在运用过程中，注油部位应定期注油，一般每三个月注黄油一次，以确保打茬机各传动部位润滑正常，减少磨损。

6、 In the process of application, the oil injection part shall be filled with oil regularly, generally once every three months, to ensure the normal lubrication of all transmission parts of the stubble machine and reduce wear.

七、自动凉茬机若长时间停用从头投入生产运用时，要从头进行查看，并通过试车工作正常后再投入生产运用。

7、 If the automatic stubble cooler is stopped for a long time and put into production again, it should be checked from the beginning and put into production again after the test run is normal.

如何稳定的使用自动凉茬机？这个问题就从7个方面讲解完毕，您对此有什么疑惑或者需求，欢迎您来我们网站http://www.qfrtrq.com咨询了解！

How to use the automatic stubble cooler stably? This question has been explained in seven aspects. If you have any doubts or needs, please come to our website http://www.qfrtrq.com Consult and understand!