The stainless steel solid wood wine barrel is made of stainless steel. Compared with the ordinary wine barrel, the stainless steel solid wood wine barrel can withstand higher pressure and is widely used in many fields. It has small and medium selectivity and strong versatility. It is non-toxic and meets the requirements of the hygienic standard for food storage and transportation. It has strong impermeability, fatigue strength and impact strength.
The stainless steel tank solid wood wine barrel has the advantages of light weight, low transportation energy consumption, no maintenance, strong adaptability, recyclable use, no need to worry about post-treatment pollution, and long service life (more than 10 years). There should be good drainage and dilution devices around the stainless steel solid wood wine barrel. If the liquid level in the tank cannot be controlled, an overflow port shall be installed in the tank to prevent overflow and unnecessary injury. When the flow at the inlet and outlet of the wine barrel is large, the corresponding flow outlet shall be installed.
When replacing the liquid in the solid wood wine barrel with stainless steel liner, you should know whether there is liquid allowed in the anti-corrosion tank. The storage pressure of solid wood wine barrel with stainless steel liner is high, and it should be strengthened when connecting with other flanges. In general, the flange and stainless steel tank solid wood wine barrel are usually fastened in the factory for corrosion protection, which may be loose during transportation and loading. Before use, the user should check the sealing performance of the rotary plastic wine barrel, add liquid and observe whether there is leakage.
The solid wood wine barrel with stainless steel liner is protected against corrosion and loss. If the bottom of the joint or flange connecting pipe has a solid wood wine barrel with stainless steel liner for corrosion protection, it should be perpendicular to the barrel wall and soft connection should be used to avoid the expansion of the barrel wall after uneven liquid filling, resulting in joint damage and leakage. If it is serious, the connector and cylinder shall be damaged. When the liquid inlet is higher than the tank bottom, the liquid inlet shall be made of curved stainless steel solid wood barrel wall to make the liquid enter the tank wall downward to reduce the impact on the tank bottom.
During the installation or manufacturing process of stainless steel solid wood wine barrel, dust, rust and other internal and external surfaces are easy to be placed. Therefore, after the equipment is installed, it needs to be cleaned to ensure that the materials are not dyed before loading, so as not to affect the materials. The common cleaning method is chemical cleaning. Chemical cleaning method can make the cleanliness of stainless steel tank solid wood wine barrel meet the basic requirements, which cannot be achieved by other cleaning methods, so it is very important to master this technology. Come to our website for more relevant matters http://www.qfrtrq.com Consult!