自动凉茬机接曲装置的特点是什么

发布于:2022-11-12 15:12:32  来源:http://www.qfrtrq.com

每台自动凉茬机都是有接曲装置构成,接曲装置是自动凉茬机较为关键的装置之一。接曲装置坐落于自动凉茬机的底端,产生对下料口漏料的搜集功效,进而节省原材料,不锈钢自动凉茬机,防止出现消耗的状况。下边介绍一下自动凉茬机接曲装置的特点:
Each automatic stubble cooler is composed of a winding device, which is one of the key devices of the automatic stubble cooler. The bending device is located at the bottom of the automatic stubble cooler, which can collect the material leaking from the blanking port, thereby saving raw materials. The stainless steel automatic stubble cooler can prevent consumption. The following describes the characteristics of the automatic stubble cooler connecting device:
1、在全自动凉茬机的加曲料仓下料口下方、处在自动凉茬机底端的传动系统传动链条上边设定一接曲筐;
1. A connecting curved basket is set below the blanking opening of the bending silo of the automatic stubble cooler and above the transmission chain of the transmission system at the bottom of the automatic stubble cooler;
2、接曲筐的两边各自固定不动在自动凉茬机支撑架的承重梁上;
2. Both sides of the connecting basket are respectively fixed on the bearing beam of the support frame of the automatic stubble cooler;
自动凉茬机
3、接曲筐为一端伸出的折型挡雨板;
3. The connecting curved basket is a folding rain shield extending from one end;
4、且折型挡雨板的伸出端设立调整地脚螺栓用以调整接曲筐在承重梁上的折型高宽比;
4. The protruding end of the folding rain shield is provided with an adjusting anchor bolt to adjust the folding height width ratio of the connecting curved basket on the bearing beam;
5、以接曲筐产生对加曲料仓下料嘴中漏料的搜集构造。
5. The collection structure of leaking materials in the blanking nozzle of the bending silo is formed by connecting the curved basket.
6、能合理地对漏料开展搜集和二次运用,进而节省原材料。
6. It can reasonably collect and re apply the leaked materials, thereby saving raw materials.
之上便是全自动凉茬机的接曲装置的特点,我们在应用时一定要掌握和了解装置的特点,才可以更好的应用它。还有相关设备的事情了解就来我们网站http://www.qfrtrq.com看看吧!
The above is the characteristics of the bending device of the automatic stubble cooler. We must master and understand the characteristics of the device in order to better apply it. Come to our website to learn about related equipment http://www.qfrtrq.com Look!

咨询热线:
0537-4556677