如何制作不锈钢内胆实木酒桶

发布于:2017-07-13 16:56:08  来源:;

制作不锈钢内胆实木酒桶可分为以下五个步骤:
Production of stainless steel wooden barrel can be divided into the following five steps:
1.先将取下来的木材劈成木片,在使用钢锯切割的时候,多会破坏掉木头本身的年轮和纤维,所以在第一步的制造过程中必须是用人工斧劈,并经过细磨成为表面平整的木板,这是将散酒木酒桶制造好的基础;
1. of the first to take down the wood into wood, when using a hacksaw cutting, will destroy the ring and wood fiber itself, so in the first step of the manufacturing process must be used for artificial ax, and after fine grinding a smooth surface of wood, which is the basis to make good wine casks of wood powder;
2.时间较长,对木材进行干燥处理。橡木片在制做前必须置于室外,这个过程主要为了增加橡木的防水性,还可以对单宁的涩味进行弱化;
2. for a long time, drying wood. Oak chips must be placed in the process of making outdoor, mainly in order to increase the water resistance of oak, can also weaken the astringency of tannins;
3.把橡木片组合起来。把已经干燥的橡木,裁成中间宽,两端小的木片,一般在制作一个桶的时候需要32块橡木片,并且用铁条对橡木进行固定;
3. combine the oak chips. Cut the dried oak into small pieces of middle width and small ends. Usually 32 oak pieces are needed to make a barrel, and oak is fixed with iron bars;
4.是至关重要的一步,对像木桶加热和熏烤。通过加热橡木这种方法可以让橡木留下烟熏的味道,这会使浸泡的葡萄酒拥有杏仁、面包的香味;
4. is a crucial step, heating and smoking like a barrel. By heating oak, this method leaves oak with a smoky flavour, which gives the soaked wine a flavour of almonds and bread;
5.检验,将散酒木酒桶盖上盖子进行密封检验,检测合格之后便可以把散酒木酒桶进行艺术加工处理,投入到市场当中.
The 5. test will cover bulk wine wood wine lid seal inspection, inspection qualified after they can put bulk wine casks of wood art processing, into the market.
按照以上方法就可可以完成不锈钢内胆实木酒桶的制作.
Made in accordance with the above method can be completed in stainless steel wooden barrel.

咨询热线:
0537-4556677